DBACnet BACnet /IP Controller

DBACnet

The DBACnet controller makes Siemens APOGEE floor level controls available to BACnet via the BACnet /IP protocol. The DBACnet controller communicates with any attached APOGEE floor level controls (such as the TEC) and makes the controls available to any BACnet system. The BACnet system can both read and write (command) the APOGEE device settings (sub-points).

Features

* When used with devices with extended addressing then up to 400 may be connected per DBACnet controller.

DBACnet Typical Application

DBACnet Connect
Datasheet
Install
Utility software Install
Metric
Non Metric